Model |
PB-IN-100HF |
Product type |
Photoelectric Beam Sensor |
Detection system |
Simultaneous breaking of 4 beams |
Infrared beam |
LED pulsed beam, Double modulation |
Protection distance |
Outdoor 100m (330ft) or less Indoor 200m (660ft) or less |
Max. beam range |
Outdoor 1000m (3300ft) or less Indoor 1000m (3300ft) or less |
Response time |
50msec. to 700msec. variable (Standard : 50msec.) |
Supply voltage |
12V to 30VDC (Non-polarity) |
Current consumption |
70mA or less at protection |
Alarm output |
Dry contact relay output 1c Reset : Interruption time + off delay Contact capacity : 30V AC/DC, 1A or less |
Environmental output |
Dry contact relay output 1a or 1b (selectable) Action : Output when weather conditions worsen Contact capacity : 30V AC/DC, 1A or less |
Tamper output |
Dry contact relay 1b Action : Activated when cover is detached Contact capacity : 30V AC/DC, 1A or less |
Alarm LED |
Red LED (Receiver) ON : when an alarm is initiated. |
Attenuation LED |
Red LED (Receiver) ON : when beam is attenuated. |
Functions |
Modulated beam frequency selection (4-Channel) Environmental module Beam power selection Alarm memory indication Programmed AGC Auto-gain lock function Sound check : Audible check of beam level Monitor jack output Frost proof cover |
Ambient temperature range |
-35°C to +66°C (-31°F to +151°F) |
Mounting positions |
Outdoor (Perimeter protection) |
Wiring |
Terminals |
Weight |
Transmitter : 1200g (42oz) Receiver : 1300g (45.5oz) |
Appearance |
PC resin (wine red) |