DG SEP77 Elektromekanik kilit ve sonlandırıcı

Strong points

• For fail secure model : power supply on strike plate side to avoid use of door loop and door drilling.

• Reversible on site

• Dead bolt for mechanical locking/unlocking

• Control signals :

- Bolt in/Bolt out signal : switch located in strike plate to control the electric bolt status

- In option : dead bolt signal tomonitor dead bolt locking

• Possible to adapt any cylinder type

• Bolt resistance : 1000 daN

Operation

When locking the door electrically ormechanically by pushcylinder or key, a spring is released and this spring drawns the bolt back.

• Exterior unlocking :

- Electrically by access control

- Mechanically by key

• Interior unlocking :

- For SEP 77 – fail secure model : Unlock electric bolt by pushing push cylinder mounted on interior handle, thus requiring no electric power. In case handle is not supplied, you can use a push cylinder mounted on a plate

- For SEP 770 – fail safe model : Unlock electric bolt by pushing electric buttom

Technical Information

Casing : Zinc-plated steel

Bolt : Solid brass

Strike plate : Stainless steel

Door clearance : 3-6 mm

Cylinder : European cylinder

Electrical Specifications

• SEP 770 Fail Safe When power off, it’s unlocked Supply 12VDC only on lock side by door loop Current : 180 mA

• SEP 77 Fail Secure When power off, it’s locked but lock can work mechanically by cylinder and key Supply 12 VAC or VDC on strike plate side by 2 contactors located on forend - On request : supply on lock side Pulse of max 10 millisecunds Current : 2.5A in operation